Hi Tan,
It depends if you installed KFP over Argo or Tekton. I believe if you used our example kfdef from the operator that should install Tekton. If that is the case, there is an example pipeline for flipping coins you can find in the KFP dashboard. We also have an example tekton pipeline here from our book "Kubeflow in Action".
Hope this helps.

Juana

On Thu, Nov 11, 2021 at 11:40 AM Tan Long Siau <Tan.Long.Siau@ibm.com> wrote:
Thank you Juana,
 
I can create the notebook now.
I try to follow this tutorial:
https://developers.redhat.com/blog/2020/07/29/from-notebooks-to-pipelines-using-open-data-hub-and-kubeflow-on-openshift#adjusting_the_pipeline
Encountered error at Compile and Upload.
Is the pipeline working?
 
Thank you.
 
Best Regards
Tan-Long, SIAU
 
 
 
----- Original message -----
From: "Juana Nakfour" <jnakfour@redhat.com>
To: tan.long.siau@ibm.com
Cc: users@lists.opendatahub.io
Subject: [EXTERNAL] [Users] Re: Unable to connect to notebook after creation
Date: Mon, Nov 8, 2021 10:38 PM
 
Hi Tan, Please use our custom notebook image found here: https://quay.io/repository/kubeflow/tf-notebook-image?tag=latest&tab=tags  You can try v1.0.0 thanks Juana On Fri, Nov 5, 2021 at 9:00 AM <tan.long.siau@ibm.com> wrote: ‍ ‍ ‍ ‍ ZjQcmQRYFpfptBannerStart
This Message Is From an External Sender
This message came from outside your organization.
ZjQcmQRYFpfptBannerEnd
Hi Tan,
Please use our custom notebook image found here: https://quay.io/repository/kubeflow/tf-notebook-image?tag=latest&tab=tags 
You can try v1.0.0
 
 
thanks
Juana
 
On Fri, Nov 5, 2021 at 9:00 AM <tan.long.siau@ibm.com> wrote:
Hi,
I am using CRC with OCP 4.8.5, just installed ODH v1.1.1. Created kubeflow project and install kubeflow using the yaml:
https://raw.githubusercontent.com/opendatahub-io/manifests/v1.3-openshift/distributions/kfdef/kfctl_openshift_v1.3.0_odh.yaml

Create a new notebook but cannot connect to it.
URL: http://istio-ingressgateway-istio-system.apps-crc.testing/notebook/kubeflow-user-example-com/server0001/

Error: upstream connect error or disconnect/reset before headers. reset reason: connection failure

Appreciate any advice.
Thank you.
_______________________________________________
Users mailing list -- users@lists.opendatahub.io
To unsubscribe send an email to users-leave@lists.opendatahub.io
_______________________________________________
Users mailing list -- users@lists.opendatahub.io
To unsubscribe send an email to users-leave@lists.opendatahub.io